The most efficient heating of a private house. Efficient home heating
What is efficient heating? country house? In the article we will try to analyze the modern market of heating systems and determine which of them is the leader in a number of the most important parameters. Which ones?
This is what we will try to find out in the next section.
Unfortunately, heating cannot be made free. The sun and wind are very unstable sources of energy. But you can cut costs.
Criteria for evaluation
What is the most efficient heating system?
On what scale will we evaluate different schemes?
- Minimum operating costs. This is, of course, the main criterion for evaluation. The budget of any family is not rubber; you always want your home to be warm and not to spend too much money on heating.
- Ease of use- In second place. Ideally, heating should maintain the desired temperature in a fully automatic mode.
The owner is only required to set temperature limits and, if necessary, daily or weekly climate changes in the house. - Project implementation price is, of course, also important. Even if the entire heating system is mounted by hand, you will have to buy equipment; and it would be better if its cost was not exorbitant.
- Additional features such as the ability to maintain a comfortable temperature in the summer heat would be a nice bonus. However, optional: for this there are household air conditioners.
Let's go through the list in that order.
Operating costs
This moment
In the process of searching for thematic materials for this article, the author came across an interesting calculation: a study was made of the cost of heating a house with an area of 200 m2, located in the Moscow region. The customer of the research is the EnergyLogic company, which supplies the widest range of heating systems.
It is precisely because of the richness of the assortment that one can not suspect that the study is biased: whatever the client chooses, the company will be able to offer him the appropriate solution.
Please note: the study dates from the beginning of 2012. Since its holding, energy prices have changed, albeit slightly.
So, depending on the heat source and equipment used, heating the described house for a month will cost the following amounts:
- Diesel fuel - 25,920 rubles.
- Waste oil - 8,640 rubles.
- Main gas - 2,880 rubles.
- Firewood - 24,480 rubles. Prices for the Moscow region are indicated; it is quite possible that at a distance from the Moscow Ring Road, the purchase of firewood will cost several times cheaper. In addition, it is possible to prepare them yourself.
- Pellets - 34,560 rubles.
- Coal - 14,400 rubles.
- Electricity when using - 33,120 rubles.
Everything is simple and clear: it is most profitable to heat with gas. If it is not within reach, the next contender for leadership in terms of the cheapness of a kilowatt-hour of thermal energy is mining; behind her on the third step of the podium is coal.
Details, nuances, perspectives
Think about it though: energy-efficient heating systems are designed to heat a home for at least a couple of decades. Otherwise, they simply will not pay back the initial investment.
Let's look into the near future, and at the same time focus on a couple of details we missed.
Ease of use
Which heating system more comfortable than others and requires less attention?
All types of electric boilers, heat pumps, digitally controlled gas and liquid fuel boilers are approximately on a par in this sense. Automatic digital control in the presence of a remote thermostat allows you to set once and for all temperature regime indoors and forget about heating.
A clear outsider is heating, even if it is very energy-efficient heating, with solid fuels. And firewood, and coal, and peat briquettes need to be loaded into the firebox manually. The loading frequency of the best boilers does not exceed one and a half days.
However: pellet boilers with storage bins can work for weeks without the intervention of the owner. Which, however, is still inferior to the autonomy of competing solutions.
Initial investment
Ground-to-water heat pumps lead in terms of project implementation costs. In addition to their own high cost, these devices require big expenses for well drilling and installation of heat exchanger probes. Alas: the most convenient and independent of climatic conditions The solution is also the most expensive.
Water-to-water pumps are somewhat cheaper. But they are tied either to the mandatory presence of a non-freezing reservoir near the house, or to a high level of groundwater.
But air-to-air heat pumps are approximately on a par with solid fuel, gas and liquid fuel boilers. Of course, there is a range of prices; but not so significant.
Buns
Any heat pump, regardless of the source of low-grade heat, is a complete climate control system. Actually, this is directly indicated by the instructions for the heating installation. Yes, and why be surprised: in fact, we have just a powerful and complex ... air conditioner that works not only for heating, but also for cooling.
What about other heat sources?
Nothing. They cannot boast of the ability to cool the air in the room.
However: even the most efficient heating radiators will be very inconvenient as a heat exchanger when working for cooling.
The reason is the inevitable condensation on them. The way out is to use pumps operating according to the soil / water / air - air scheme.
An alternative is to use underfloor heating systems. A large cooling surface will allow the use of a coolant temperature that is only a few degrees lower than that of air.
Conclusions and assessments
So all the same: what to lean towards when designing heating in a new cottage?
However, the conclusions drawn for themselves can be voiced as follows:
- The optimal heating of a country house of a small area, where you appear occasionally, should be, first of all, cheap at the implementation stage and as convenient as possible. The description is fully consistent - inexpensive analogues of the boiler that do not use the mediation of the coolant.
It is more profitable, of course, to heat main gas; however, taking a couple of replacement cylinders with you for the weekend is not so expensive.
- If you are building a house where you intend to live permanently and have the opportunity to invest a significant amount in it, a ground-to-air heat pump will be the best choice. Now it is one of the most economical heating systems; in the near future promises to become a clear leader.
At the same time, the pump does not require frequent maintenance, is controlled in a fully automatic mode and is able to provide you not only with heat, but also with coolness in the summer months.
- In warm climates, inexpensive air-to-air heat pumps and their even more budget-friendly little brothers, inverter air conditioners, can be used for heating.
Pictured is an air-to-air heat pump. This is a great solution for areas with mild winters.
Heating appliances
Many owners of their own homes are concerned about the question - is it possible to build the most efficient heating system with your own hands? Heating companies claim that only they can do it right, efficiently and accurately. However, they are silent about the cost of their services. And very often their prices for many consumers are simply unattainable.
In such conditions, consumers have one option left - self-installation of the system. What will it give?
- First, understanding its structure. Thanks to this, it will be easier to maintain heating. Small malfunctions or adjustment of parameters - all this you can correct yourself.
- Secondly, the ability to minimize the design. You will be able to avoid some of the frills that are so abundant in standard heating systems.
Which boiler is better
Talking about the efficiency of boilers operating on different fuels is a thankless task. It is simply impossible to determine which one is better, because each type has both advantages and disadvantages. Ideally, it is necessary to calculate which boiler will create fewer problems during operation. Although the initial costs also affect the choice.
For example, gas is considered the best solution to the problem. During operation, this is how it is, but installation and connection to gas pipe will require money, time and nerves. In addition, gas pressure in winter does not meet the required standards in all regions, so problems will arise in this regard.
We will not talk about boilers operating on solid and liquid fuels. With them always problems through the roof. But electric boilers currently the best option is:
- First, they are easy to install and connect.
- Secondly, in them the parameters of the coolant are regulated automatically.
Of course, problems with electricity arise in winter, but not as serious as with gas. And yet, one piece of advice is to install electric boilers as the main heating device, and small stoves or solid fuel boilers use as a backup arsenal. This is how you can avoid big problems in winter.
Wiring diagram
Wiring diagram
There is a fairly large selection of schemes and systems that will work very well. These are both single-pipe and two-pipe systems, with collectors, registers and radiators, with top or bottom wiring.
It must be borne in mind that electricity will sometimes turn off, so it is better to connect the electric boiler to brick oven into one system. Need to tie circulation pump in case it is turned off. That is, take all measures so that the disappearance of electricity does not in any way affect the performance of the heating system at home. It is very important. By the way, if there are severe frosts outside, then all furnaces must work simultaneously - and this must also be taken into account.
Now for the piping. The physical laws that operate in the heating system independently regulate the flow of coolant from the boiler to the radiators. And the higher the rise point of the coolant, the more efficient the system works. In this case, the optimal lifting height is 3 meters. If the ceilings in your house are below this value, then the wiring is best done in the attic. In this case, it is necessary to take care of the thermal insulation of pipes.
And now for the type of wiring. Ideally, you need to do a beam collector wiring. A collector is a system of connected pipes that extends from the main coolant supply pipe to heating radiators. Its advantages are that the coolant is evenly distributed over all batteries, which means that it will be equally warm in all rooms. In addition, in the collector on each branch, you can install a valve that shuts off the flow hot water to a separate radiator. This is very convenient if you need to repair any one battery.
Gas Italian boilers Nova Florida
The collector system has shown itself well in all types of houses - both single-story and multi-story. But if we talk about a multi-storey private house, then there are other options that work very effectively. For example, two-pipe system with top wiring. But the disadvantage of this network is that its construction requires a large amount of materials - pipes, fittings and valves. Therefore, if you are constrained in financial opportunities, then take the collector option as a basis.
Conclusion on the topic
We do not impose on you the choice of this or that system, because each owner of a private house has different conditions, a different region of residence. Therefore, each of you must choose one or another boiler, the correct layout of the pipe system and the installation scheme. But we recommend that you take our advice into account. If you are in any doubt, then contact the experts who will resolve all your doubts.
Today, more and more private houses are becoming comfortable. This means that they are equipped with all major communication systems, including modern heating. Heating is an integral part of any home: it is necessary to heat the room, create a favorable microclimate. Choosing one or another type of heating is very difficult, because each of them has certain advantages and disadvantages.
Better in terms of heat dissipation aluminum radiators than steel.
All types of heating can be divided into 3 main types depending on the type of coolant: those running on electricity, natural gas, liquid and solid fuels. Which of them is the most effective can be found out only on the basis of several factors: ease of operation, cost of equipment, degree of heating and uniformity of heating of a particular room, safety of the heating system and its durability. It is necessary to consider in more detail what is the most efficient heating, as well as the main factors that are taken into account when choosing the type of heating.
Electric heating system
Any heater requires certain costs, however, the least expensive in terms of installation is, of course, electric heating at home. It is also the safest. Often electrical devices left unattended - this is their great advantage. In addition, this heating system does not require complex and bulky equipment, which is also very important. In order to make such heating at home, you will need a constant source of high voltage and energy. In addition, relatively large costs will be associated with paying bills.
Of course, it all depends on the frequency of use of the device, its size and power. The electrical system is well suited for a country house, since in this case you do not have to install a chimney or build a stove.
The temperature in this case can be easily adjusted using the remote control. Of great importance is the fact that heating occurs very quickly, unlike other methods. Thus, the only, but significant disadvantage of this type of heating is the high cost of electricity. Everyone knows that its value is growing from year to year.
Heating system for solid and liquid fuels
Such a system is unstable. The heat quickly leaves, and it requires the burning of more and more portions of fuel. Such equipment pollutes the atmospheric air and indoor air, thereby worsening the microclimate of the room. The most common at present is water heating of a house or apartment. In this case, the house will be characterized by uniform heating of air and surfaces. The equipment includes radiators, the temperature of their surface is easy to regulate.
Radiators are designed to distribute heat. Water heating has its drawbacks too. First of all, this is a high hydrostatic pressure in the pipes, inconstancy of heat transfer, the possibility of water freezing in emergency situations. Efficient heating is a guarantee of comfort in any home, especially in the cold season. Batteries, radiators - all this is very relevant today, but there are also more classic ways to heat a room. These include the use of solid and liquid fuels. The advantage of heating on solid raw materials is that it is not necessary to use sources of electricity for this. The type of coolant in this case is available to almost everyone. The big disadvantage lies in the need for a special room for the use of heating equipment (boilers). Coal, firewood and other materials can be used as fuel. They also need to be purchased.
Gas heating
Along with equipment such as radiators, home heating has found wide application gas equipment. It is easy to use, it is possible to regulate the temperature regime without much difficulty. This type of home heating has the highest efficiency. Gas can heat large houses. It should also be noted that natural gas is an environmentally friendly product, it is safe to use.
The bowels of our country are rich in gas, which is why gas is in such great demand as a source of heating.
The disadvantage is that for a more uniform heating of the house, you need to buy special equipment. An underwater gas pipeline system will also be required. Certain problems may arise with gas service. All this limits the use of gas for home heating.
Other home heating systems
To heat the house, you can use not only radiators, but also stoves. Stove heating found wide application in private homes. It has been used since antiquity. Its advantages are that it is well suited for heating small areas, does not require any equipment. Russian stoves can be used for cooking. In addition, stoves for any home are part of the interior, they can be made in a decorative style. The disadvantage is that ovens take up a lot of space. For their work, it is constantly required to harvest firewood, which is quite expensive. Furnace furnaces are dangerous because there is always the possibility of carbon monoxide poisoning in case of improper operation. The air warms up unevenly.
Alternative types of heating can also be used for the home: with the help of steam or air. Hot air is well suited for heating large rooms. It is advisable to combine it with a ventilation system, it does not require special equipment, a very hygienic way. There is only one drawback - possible heat loss as air passes through the pipes. Steam heating is suitable for a small house or cottage. It has a low hydrostatic pressure, radiators and pipes do not require a large amount of material. The downside is that you can't control the temperature.
Radiators get very hot, so they must be shielded. This type of heating is used to a limited extent, it is prohibited in children's institutions because of the danger in direct contact with radiators. Thus, the most effective types of home heating in all respects are water and air. published
Currently, much attention is paid to the organization economical heating. In fact, the heating system must meet two main parameters: it must be economical on the one hand, and efficient on the other. The concept of efficiency refers to the achievement of the required temperature parameters in the room.
This type of heating is quite new and seems unattainable to many. However, this representation is erroneous. The most important misconception of many people is that they consider it possible to organize this type of heating only in the area where there is a rather high volcanic activity. For this reason, homeowners located in our latitudes do not even consider this option.
The very technology of organizing this type of heating implies the presence of a special pump, which is placed deep into the earth. Therefore, this unit can quite successfully generate heat even at low temperatures in our latitudes.
You can equip this type of heating yourself, but it’s better to call the master of our company. It is they who will be able to organize the heating of a country house at no extra cost.
The main node in this system is the pump. It is connected to two circuits at once. The first of them is a familiar system that is installed in the house, and the second in the form of a heat exchanger is located in the ground or under water.
In such a heat exchanger there is a liquid that takes the ambient temperature. Then it enters the heat pump, and from there the already collected heat goes to the heating system of the house.
air heating
The organization of air heating of a country house should be carried out taking into account the basic sanitary parameters. A ventilation system must be present in this system. It is the parallel operation of both systems that makes it possible to effectively heat the house.
The ventilation system is necessary in order to remove already exhausted air from the room. After all, all life-support processes lead to the fact that the air in the interior becomes more humid and accumulates dust particles.
These factors have a significant impact on the efficiency of the interior space of the house and can lead to undesirable results. For example, due to high humidity, condensate can form on the walls of the room, which causes damage to structures by fungus over time.
Now this heating system is performed using two independent circuits. The first of them is used to ventilate the room, and the second one is used for air heating. AT recent times combined systems.
Efficient heating of the house can be performed using domestic-made installations in which diesel boilers are installed. It is quite compact and does not take up much space in the room. The principle of its operation is to generate heat using electricity or diesel fuel. Further, the heat is distributed throughout the room using a special air source heat pump.
Solar heating of a private house
One of the most reliable sources of energy is sunlight. Now there are a number of ways to convert the energy of the luminary into thermal energy.
Of course, this method of organizing the heating of a cottage is somewhat costly. But it is worth noting that in addition to money for the purchase of equipment, the owners of the house will no longer have to spend other needs. Therefore, this type of heating is the most promising and, most importantly, environmentally friendly.
The approximate service life of such equipment with proper operation will be at least a quarter of a century, and in three years it will be possible to talk about the full payback of funds spent on organizing the system.
The main device for generating energy is a solar battery or collector. The very same heating circuit in the house is no different from other methods. At the same time, water acts as the main heat carrier, which is heated by the energy received from solar panels.
It is better to mount such batteries on the south side of the house (preferably on the roof) with an inclination angle of about 30 degrees. To improve energy production, additional obstacles must be removed. These can be tree branches.
For example, solar panels for heating a house with an area of 4 square meters can provide heating for a country house where a family of three lives.
Heating your own home with electricity
You can create a heating system based on electricity. There are two main ways here.
- In the first option, direct heating can be done. This will require several oil heaters or convectors. Further we make their installation in rooms according to the area. These heating elements can be installed on special stands or permanently mounted on the walls. In the latter case, it is necessary to provide space in the room.
- In the second option, special economical boilers for heating a private house, performing the functions of a heat carrier heater to the required temperature.
In both cases, electricity is the source of energy.
In this case, in the first variant, there is no need to mount the heating circuit (pipes and radiators). It is enough just to connect the heaters to the network. But for this it will be necessary to provide for a margin of network reliability, since the load will increase significantly. Therefore, this method is more costly from a long-term perspective (electricity bills will be a significant expense for the owners).
In the second case, at the initial stage, it will be necessary to invest in the purchase and installation of equipment for the circuit and an electric heating boiler 220 V. After that, the system will provide heating for the house for many years, and the cost of purchasing electricity will be much less. Also in this system, automation is provided, which allows you to adjust the heating of the room, which will be an additional source of savings.
You can also organize heating at home with underfloor heating. In this case, during construction, a special heating circuit is placed in the floor, which is driven by electrical energy.
Of all the heating methods, this is the most common and efficient in terms of the combination of energy costs and efficiency.
The organization of this system will require the purchase of radiators, pipes and gas boiler heating gas. It will also be necessary to spend money on paying for the work of specialists who will install the system.
In order for the operation of this heating system to be effective, it is necessary to choose the right boiler. You should be aware that there are three types of equipment on the market that differ in the amount of power generated.
The first two types with indicators of 65 and 1700 kW are perfect for heating a private house, and units with an indicator of 1700 kW are perfect for heating industrial facilities.
It is also possible to use boilers of one and two contour types.
- If you use a unit with one circuit, then the residents will be provided with only heating.
- If you use a two-circuit boiler, then you can organize not only the heating of the house, but also the supply of hot water to residents.
To increase heat transfer, special ventilation systems are installed in the boilers, which improve the removal of combustion products and provide quick access to oxygen in the boiler.
This system works quite simply. The coolant in the form of water is heated in the boiler and flows through pipes to the radiators. In order to provide the required pressure, a pump is needed for heating in a private house. This allows you to achieve the same level of heating in all rooms.
Installation of this system must be carried out only with the help of specialists. This will reduce costs and ensure the safety of equipment operation.
This type of heating provides for a standard set of equipment (radiators and pipes), as well as special solid fuel heating boilers long burning. This unit must run on solid fuel (it can be wood, coal and other combustible materials). Thus, it will create thermal energy as a result of fuel combustion.
This unit is an excellent helper in a private house for the disposal of solid household waste, since it works on almost everything that burns. It should be noted and the high degree of energy return of this device. These multi-fuel boilers for heating a private house are a promising direction.
This system provides for a special heating circuit working on a closed principle. It is necessary to install a boiler that will generate thermal energy for the coolant. The latter can be either water or antifreeze.
Otherwise, such a heating system is no different from the previously described methods.
Additionally, it is equipped with automation, which allows you to adjust the intensity of the supply of heat carrier to the system and its heating temperature.
This will be important from an economic point of view, as it will save the financial resources of the owners, which they spend on purchasing energy.
Heating with ceramic panels
Now heating with the help of ceramic panels. They have wonderful appearance and don't take up much space.
The source of energy for such heating elements is electricity. At the same time, they consume several times less energy than conventional radiators or convectors. They will help you decorate the room. They can be hung on the walls as paintings (a different image is applied to them).
The thickness of such a heater does not exceed 15 millimeters, and a power of 370 watts will allow you to heat one room.
At the same time, these units are safe from an environmental point of view and can significantly save money for residents of a private house, which are spent on paying for electricity.
home heating installation cost
Our company can provide a complete list of all services for the installation of heating systems of various types. Our prices are the most favorable for both the capital and the region.
Work in progress | Price |
---|---|
Installation of a floor gas boiler | from 11500 rub. |
Installation of an indirect heating boiler | from 7500 rub. |
Installation of a direct heating boiler | from 3000 rub. |
Installation of the boiler safety group | from 1100 rub. |
Installation of the circulation pump | from 1400 rub. |
Expansion tank installation | from 1400 rub. |
Installation of the main distribution manifold | from 900 rub. |
Installation of the thermohydraulic distributor | from 1700 rub. |
Installation of the pumping group | from 2000 rub. |
Installation of a radiator, floor convector, etc. | from 1800 rub. |
Installation of floor convector | from 3000 rub. |
Installing a heated towel rail | from 2000 rub. |
Manifold installation | from 2500 rub. |
Installation of risers made of polypropylene, copper, polyethylene, metal-plastic | from 300 rub. |
Heating system wiring | from 200 rubles/line m. |
Pressure testing of the heating system | from 4000 rub. |
Creation of a heating system in own house requires a certain level of knowledge and qualifications. It is thanks to the organic combination of these requirements that it is possible to create a system that can serve the owners for a long time, providing an effective level of heating. The specialists of our company will help you achieve the desired result in the most short time and at a price acceptable to the client.
Examples of completed work on the installation of heating of private houses
The desire for energy conservation is an urgent need of mankind. There are fewer and fewer resources left on our planet, their cost is constantly growing, and the by-products of human activity are poisoning the environment. Energy saving is one of the ways to solve the problem. Choosing energy saving heating for your home, you save resources, make a personal contribution to the preservation of the environment and create a comfortable microclimate in the house. There are several popular technologies that enable this comprehensive program to be implemented. We offer an overview of energy-saving heating systems for a private house.
Types of energy sources
Traditionally, several sources of energy are used for heating:
Solid fuel - a tribute to tradition
For heating use firewood, coal, peat briquettes, pellets. Solid fuel boilers and stoves can hardly be called economical or environmentally friendly, but the use of new technologies can significantly reduce fuel consumption and, as a result, the amount of combustion products emitted into the atmosphere.
AT last years the number of sales of gas-generating furnaces and boilers is increasing. Their advantages are the complete combustion of fuel, the use of pyrolysis gas as a heat source. Installing such a boiler saves energy. We recommend purchasing such solid fuel boilers from trusted retailers. For residents of Yekaterinburg and the Sverdlovsk region, we can recommend the Dacha 66 online store.
Electricity is a convenient and safe source of heat
The only drawback of using electricity for heating is the high cost. However, this issue is being resolved: constantly developed electrical systems heating, consuming a relatively small amount of energy and providing efficient heating. Such systems include film heaters, infrared radiators.
Underfloor heating is most often used as an additional or alternative heating system for a home. The advantage of this type of heating is that the air is heated at the level of human growth, i.e. the principle is implemented - "warm feet, cold head"
Heat pumps – economical and environmentally friendly installations
The systems work on the principle of converting the thermal energy of the earth or air. In private homes, the first heat pumps were installed back in the 80s of the twentieth century, but at that time only very wealthy people could afford them.
Every year, the cost of installations is getting lower, and in many countries they have become very popular. For example, in Sweden, heat pumps heat about 70% of all buildings. Some countries are even developing building codes requiring developers to install geothermal and air heating systems.
Heat pumps are installed by residents of the USA, Japan, Sweden and other European countries. Some craftsmen collect them with their own hands. This is a great way to get energy to heat your home and save environment
Solar systems - a promising source of energy
Solar thermal systems convert radiant solar energy for heating and hot water. Today, there are several types of systems that use solar panels, collectors. They differ in cost, complexity of production, ease of use.
Every year there are more and more new developments, opportunities solar systems are expanding and prices are falling. So far, it is unprofitable to install them for large industrial buildings, but they are quite suitable for heating and hot water supply of a private house.
Solar thermal systems require only initial costs - for purchase and installation. Once installed and configured, they work autonomously. Solar energy is used for heating
Thermal panels - energy-saving heating
Among energy-saving heating systems, thermal panels are becoming especially popular. Their advantages are economical consumption of electricity, functionality, ease of use. The heating element consumes 50 watts of electricity for heating per 1 m², while traditional electric heating systems consume at least 100 watts per 1 m².
A special heat-accumulating coating is applied to the back side of the energy-saving panel, thanks to which the surface heats up to 90 degrees and actively releases heat. The space is heated by convection. The panels are absolutely reliable and safe. They can be installed in nurseries, playrooms, schools, hospitals, private homes, offices. They are adapted to voltage fluctuations in the mains, are not afraid of water and dust.
An additional "bonus" is a stylish appearance. Devices fit into any design. Installation is not difficult, all the necessary fasteners are supplied with the panels. Already from the first minutes of turning on the device, you can feel the warmth. In addition to air, the walls warm up. The only negative is that the use of panels is unprofitable in the off-season, when you only need to slightly heat the room.
Monolithic quartz modules
This heating method has no analogues. It was invented by S. Sargsyan. The principle of operation of thermal electric heaters is based on the ability of quartz sand to accumulate and release heat well. The appliances continue to heat the air in the room even after a power outage. Systems with monolithic quartz electric heating modules are reliable, easy to use, do not require special care and maintenance.
The heating element in the module is completely protected from any external influences. Thanks to this, the heating system can be mounted in rooms of any purpose. The term of operation is not limited. Temperature control is carried out automatically. Devices are fireproof, environmentally friendly.
Cost savings when using electric heating modules is about 50%. This became possible because the devices do not work 24 hours a day, but only 3-12. The time during which the module consumes electricity depends on the degree of thermal insulation of the room where it is installed. The higher the heat loss, the greater the energy consumption. Heating of this type is used in private houses, offices, shops, hotels.
Monolithic quartz electric heating modules do not emit noise during operation, do not burn air, do not raise dust. The heating element is monolithic in the design and is not afraid of any external influences
PLEN is a worthy alternative
Film radiant electric heaters are one of the most interesting developments in the field of energy-saving heating technologies. economical, efficient and quite capable of replacing traditional types of heating. The heaters are placed in a special heat-resistant film. PLEN is attached to the ceiling.
The film radiant electric heater is an integral structure consisting of power cables, heaters, a foil shield and a high-strength film
The principle of operation of such a system
Infrared radiation heats the floor and objects in the rooms, which in turn give off heat to the air. Thus, the floor and furniture also play the role of additional heaters. Due to this, the heating system consumes less electricity and gives maximum results.
Automation is responsible for maintaining the desired temperature - temperature sensors and a thermostat. The systems are electrically and fireproof, do not dry out the air in the premises, and operate silently. Since heating occurs predominantly by radiation and to a lesser extent by convection, PLENs do not contribute to the spread of dust. The systems are very hygienic.
Another important advantage is the absence of emission of toxic combustion products. Systems do not need special care, are harmless to human health, do not poison the environment. With ceiling infrared heating, the warmest zone is at the level of the legs and torso of a person, which makes it possible to achieve the most comfortable temperature regime. The life of the system can be 50 years.
The infrared heater performs approximately 10% of the space heating work. 90% falls on the floor and large furniture. They accumulate and give off heat, thus becoming part of the heating system.
What makes PLAN so profitable?
The buyer bears the greatest expenses at the time of purchasing the film heater. The design is easy to install, and if desired, you can install it yourself. This saves on employees. The system does not need maintenance. Its design is simple, therefore durable and reliable. It pays off in about 2 years and can serve for decades.
Its biggest plus is significant savings on electricity. The heater quickly warms up the room and then simply maintains the set temperature. If necessary, it can be easily removed and mounted in another room, which is very convenient and beneficial in case of moving.
Infrared radiation has a positive effect on human health, activates the body's defenses. By installing PLEN, the owner of the house, in addition to heating, additionally receives a real physiotherapy room
PLEN editing training film
The video shows all the stages of installing a film heater:
The importance of reducing heat loss
The purpose of the review of energy-saving heating systems for a private house is to help readers choose the most profitable way to heat their home. New systems appear every year, and information about them can save a lot of money for many people. But even the most advanced energy-saving heating technologies will be useless if you do not take care of the insulation of the house in a timely manner.
Good double-glazed windows and insulated doors will help reduce heat loss by 10-20%, a high-quality heat insulator - up to 50%, and an exhaust air heat recuperator - up to 30%. By insulating the house and installing an energy-saving heating system, you will achieve maximum results and pay for heat at a minimum.